Hobbywing XRotor X8 G2 Motor with Propeller
Hobbywing XRotor X8 G2 Motor with Propeller
The Hobbywing XRotor X8 G2 Motor with Propeller is a professional UAV propulsion component designed for compatible agricultural drones, commercial multirotors and other high-performance drone platforms.
The motor and propeller combination provides a convenient solution for drone assembly, maintenance and replacement, making it suitable for agricultural drone manufacturers, UAV integrators, technicians, repair centres and professional drone operators.
- Paired with the all-new
- MFP 30x11Sfolding propeller
- The X8 G2
reduces weight by5%
while retaining the X8’s
maximum thrust advantage
(*Based on internal test data from HOBBYWING, comparative calculation of battery capacity consumption over the same flight distance was obtained at forward flight speeds of 12 m/s and 20 m/s on a quadcopter flying at sea level in 34 °C ambient temperature, both no-load and at rated payload. Actual results may vary with different airframe configurations, battery models, and test conditions, for reference only.)
- A high-speed flight of
20m/s can increase
the drone's flight
endurance by
approximately
without changing the
battery capacity of the
entire drone. - 10%*
Upgrade from
Previous
Products
- The X8 propulsion system has been trusted by a vast number
- of users for years since its introduction. The new-generation
- X8 G2 has the same mounting dimension with the previous
- product, and fully compatible with the frame designed for
- previous product. Existing X8 users can complete the
- transition easily with minimal tuning, including overall device
- installation, flight controller matching, and flight operation
- settings—while achieving a brand-new experience. New
- customers can immediately benefit from the outstanding
- performance of X8 G2. *
-
The MFP 30x11S (with adapter) and MFP 30x11 (with adapter) are both fully compatible with the installation structures of the two generations of X8. The mounting hole positions of the adapters are the same, so they can be mixed and used on the same aircraft. However, it should be noted that the single-piece weight of the two types of propellers is different. Only one type of propeller can be installed on the same adapter; otherwise, the inconsistent dynamic balance may lead to vibration or even shaft breakage. -
(*Due to the differences of different drone type configurations on the market, mixing previous products and new-generation X8 G2 on the same drone is generally not recommended. If mixed flight is unavoidable under special circumstances, please note that there are slight differences in the RPM startup curves between the two generations. Users must pay close attention to the symmetrical positioning and distribution of the old and new units, and perform flight controller calibration. Before takeoff, ensure all the motors have successfully passed their idle RPM before increasing the throttle for takeoff, in case the drone may lose control or crash.)
Flight Controller Matching
Flight Operation Settings
Adjustment Modes
for Easy Use
- Users can adjust the drive parameters, motor rotation direction, LED color, and other
- settings via the remote controller or DataLink software, optimizing flight performance
- based on application needs. Additionally, the dedicated OTA function of the DataLink
- host computer software facilitates efficient multi-ESC firmware upgrades in one drone.
Dual Throttle Redundancy
Control
Note: The system is reserved for customized DShot digital throttle and corresponding protocol compatibility, meeting the demand for FPV adapting to larger drone frame, and enabling rapid building of the drone system.
Please verify the exact motor, propeller size, rotation direction and electrical specifications against your drone configuration before installation.
Package Includes
1 × Hobbywing XRotor X8 G2 Motor
1 × Compatible Propeller
Please verify the exact CW/CCW configuration and package contents before ordering.
Compatibility
Before purchasing, confirm compatibility with your drone frame, ESC, battery voltage, flight controller, motor mounting arrangement and propeller configuration.
Install and operate the propulsion system according to the manufacturer's recommended specifications.
Buy Hobbywing XRotor X8 G2 Motor from RCLINK
RCLINK supplies professional drone motors, propellers, UAV propulsion systems, agricultural drone components and replacement parts for manufacturers, technicians and professional drone operators.
Choose the Hobbywing XRotor X8 G2 Motor with Propeller for compatible agricultural and professional UAV applications.